Your cart
There are no more items in your cart
Bticino actuator with 1 relay for single loads 3476: Overview
The device is characterized by small dimensions and can be used in flush-mounted boxes, junction boxes, boxes and channels. Retrofit use is particularly advantageous, as it involves positioning the item on the bottom of the flush-mounted box, behind lowered automation devices or behind traditional devices (buttons, switches, etc.). This actuator/control accepts a traditional button with NO contact as input. The command/actuation device has a bus input made via the blue cables, an input to connect the external button via the gray and black cables and a relay contact for load control via the two white cables.
Configuration Mode of the Bticino Actuator
-
Physical Configuration
If installed in a MyHOME system, the device can be physically configured by inserting the configurators in the appropriate locations.
-
Configuration via MyHOME Suite software
An alternative method involves the use of the MyHOME Suite software, which can be downloaded from the website www.homesystems-legrandgroup.com. This option offers more flexibility with many more options than the physical configuration. For the list of modes and their meaning, refer to the instructions in this sheet and to the "Glossary" section of the MyHOME design and installation guide.
NOTE: For this device the MyHOME Server automatically configures 1 channel.
Technical Characteristics of the Device
-
Voltage 27Vdc
-
Current In 13mA
-
Contact type 1
-
IT MyHome series
