Bticino CLASSE100 V16E 2-wire single-family video intercom kit

Technical Specifications of the Kit Components

LINEA 3000 Video Keypad ( Cod: 343081)

• Technology: 2 wires
• Installation: Wall mounted with zama front and wide angle colour camera
• Illumination: White LEDs for low-light shooting range
• Configuration: Suitable for single-family or two-family installations
• Electric lock: Activation connected directly between terminals S+ and S- (18 V 4 A impulsive, 250 mA maintenance, 30 Ohm max)
• Name Tag: Illuminated with white LED
• Protection: IP54 protection grade and IK10 robustness grade
• Height: 190 mm
• Width: 100 mm
• Depth: 26.65 mm
• Calls: 2
• System Type: 2 wires
• Recommended Installation Height: 160-165cm
• Operating Temperature: -25/+70°C
• Resolution: 330 TV Lines H

Video intercom CLASS 100V16E ( Cod: 344672)

• Technology: 2-wire hands-free with teleloop
• Display: 5” color LCD
• Commands:
  • 2 physical buttons for answering and ending calls
  • 3 touch buttons for electric lock, stair lights and activation of external unit/scrolling
  • 4 configurable touch buttons for additional functions
• Adjustment: Side lever for color, brightness, display contrast, audio volume and ring tone
• Signal LED: For call exclusion
• Installation: Outside the wall with included bracket or on a table with support purchased separately (Code 344692)
• Configuration: Required for the professional studio function
• Voltage: 20/27V
• Height: 165 mm
• Width: 164 mm
• Depth: 20.5 mm
• Maximum Cable Section: 2x1 mm²
• System Type: 2 wires
• Recommended Installation Height: 160-165cm
• Operating Temperature: -5/+40°C
• Resolution: 800 x 480
• Wi-Fi: No
• Teleloop: Yes
• Color: White

BUS-SCS Power Supply in 6 DIN Modular Case ( Cod: 346050)

• Compatibility: 2-wire audio and video systems in 6 DIN modular housing
• Power supply: 110 - 240 V AC @ 50 – 60 Hz
• Outputs:
  • Two safety extra low voltage power supplies (TK BUS, PI BUS and SCS; terminal 1 - 2)
  • Alternating, non-concurrent use
• Video Adapter: Integrated, avoids the use of item 346830
• Additional Use: Additional power supply for internal or external stations
• Protection: Against overload and short circuit, SELV double insulation
• Installation: In accordance with current regulations, only in switchboards designed for DIN devices, internal environments
• Switch: Omnipolar with separation >= 3 mm, close to the power supply
• Category: CAT II 2500 V, requires additional protection from transient voltages
• Integrated Fuse: F1 T 3.15A 250V
• Dimensions: Space requirement: 6 DIN modules

PRI (AC Power Input):

• Nominal Voltages: 110 – 240 V
• Nominal Currents: 730 – 400 mA
• Working Frequency Range: 50 – 60 Hz
• Power Consumption at Full Load: 40 W max
• Power Dissipation: 8 W max
• Full Load Efficiency: 80% typ
• Standby power: < 1 W
• Operating Temperature: -10 – +55°C

BUS TK, BUS PI, SCS:

• Nominal Voltage: 27V DC
• Rated Current: 1.2A
• Rated Power: 32.4W

1–2:

• Nominal Voltage: 28.5V DC
• Rated Current: 1.2A
• Rated Power: 34.2W

Power Supply Installation:

• Always install in appropriate containers
• Protect from dripping and splashing water
• Do not block the ventilation openings
• Use a double pole switch with separation >= 3 mm near the power supply
• Do not solder the ends of the conductors into the terminals

Relay Module for Electric Locks Not Managed by BUS ( Cod: 346250)

• Function: Gate opening to be combined with the external push-button panels provided
• Compatibility: Locks NOT managed by BUS via the external unit
• Contact Type: NO-NC
• System Type: 2 wires