Your cart
There are no more items in your cart
Cillit Duna Safety Manual Filter
Applications
Manually cleaned protection filter suitable for drinking water or for technological use. It removes foreign bodies from the water, preventing them from penetrating the system and damaging pipes and valves, triggering corrosion phenomena.
Specifications
Periodically replaceable filter element. The Cillit Duna is installed on the cold water pipe coming from the aqueduct or upstream of the hydraulic circuit to be protected. For drinking water, use only filter elements in synthetic mesh or stainless steel with a filtering capacity of no less than 50 microns. For cartridges of other materials, please contact us specifying the use to be made of them. Connections: 3/4 inches
Installation
The appliance must be installed in compliance with current regulations and must be carried out by a qualified installer. Observe the instructions in the assembly and service instructions for correct installation.
Warnings
Protect the filter from frost, direct sunlight and chemical vapours, as well as heat sources above 40°C. The water pressure in the network must not exceed the maximum permitted; if necessary, install a pressure reducer. Replace or wash the filter element as often as necessary. All materials used comply with the standards and requirements relating to release foreseen for devices used in the sanitary circuits of a home.
